MS08-037_DL

Support

Last version of TDS/TCS systems allow to apply the patch remotely with the new Océ Remote Patch procedure. With those versions, there is no need to build floppy or CD-ROM to apply the patch. The Océ remote patch procedure is realized through HTTP protocol with a Web browser. The TDS/TCS versions compatible with Océ Remote Patch procedure are mentionned in the table below. You can also check whether the TDS/TCS system is compatible with Océ Remote Patch procedure : 1. From a client Web browser, enter the following URL : http://<tds-tcs_hostname_or_ip_address>/OceRemotePatch.html where <tds-tcs_system_hostname_or_ip_address> is the hostname or IP address of the TDS-TCS system Note : Please respect lowercase/uppercase for "OceRemotePatch.html" 2. If the following page appears : Your TDS-TCS system is compatible with Océ Remote Patch procedure, so follow the instructions below, otherwise click here to apply the patch with a media (floppy or cd-rom)

Océ Remote Patch is available for

Océ TDS400 2.1.9 Océ TDS450 3.3 Océ TDS600 4.1.9 Océ TDS700 1.2 Océ TDS800 2.1.9 Océ TDS860 1.0.9
Océ TCS400 2.2.9 Océ TCS500 1.4

Microsoft bulletin

MS08-037

Océ Remote patch

Name: patch_remote_shf017b.oce
Size: 1 054 Kb
Revision date: 8/12/2008

Download now » (registration required)

See below for installation instrutions

Patch installation instructions for systems supporting Océ Remote patch procedure : 1. Download the patch file patch_remote_shf017b.oce and save the file on your computer (Win98/WinMe/Win2000/WinXP/Winserver2003/Vista) 2. From a Web browser (on your computer), enter the following URL : http://<tds-tcs_hostname_or_ip_address>/OceRemotePatch.html where <tds-tcs_system_hostname_or_ip_address> is the hostname or IP address of the TDS-TCS system Note : Please respect lowercase/uppercase for "OceRemotePatch.html" 3. When the following page appears, enter the password (see your Printer User manual) :

4. When the following page appears, browse for the patch previously downloaded :

    5.   When clicking on "Apply Patch" a confirmation popup           window will appear. After you will confirm, some           information will be displayed on the screen to inform           you on the patch process. When you'll see the
          following information message, the controller will reboot
          in order to complete the patch application : The controller will be restarted...Waiting for PLC patch process to end...     6.   After a little while, you'll be able after refreshing the          URL to see the following page again (after controller          will have been rebooted) :

7. After having entered the relevant password (Please see your Printer User manual), the following page will appear, and you can control whether the patch has been installed : * latest successful installed patch * last execution status : ... Success

_____________________________________________________ _____________________________________________________

Patch installation instructions for systems equipped with a floppy or CD-ROM unit

Patch for	Océ TDS300 1.1.9/1.1.8.1/1.1.5 Océ TDS320 1.0.9/1.0.8.1/1.0.8/1.0.2 Océ TDS400 2.1.9/2.1.8.1/2.1.5 Océ TDS450 3.3 and lower versions Océ TDS600 4.1.9/4.1.8.1/4.1.8/4.1.6 Océ TDS700 1.2 and lower versions Océ TDS800 2.1.9/2.1.8.1/2.1.5 Océ TDS860 1.0.9/1.0.8.1/1.0.8/1.0.3 Océ TCS300 1.2 and lower versions Océ TCS400 2.2.9/2.2.6/2.2.5 Océ TCS500 1.4 and lower versions
Microsoft bulletin	MS08-037
File details for systems equipped with a Floppy unit	Name: patch_shf017b.exe Size: 1 292 Kb Revision date: 8/12/2008 Download now » (registration required) Click here for installation instrutions
File details for systems NOT equipped with a Floppy unit	Name: patch_shf017b.iso Size: 1 108 Kb Revision date: 8/12/2008 Download now » (registration required) Click here for installation instructions

Patch installation instructions for systems equipped with a floppy unit      1.   Download the patch file patch_shf017b.exe and save the file on
           your computer(Win98/WinMe/Win2000/WinXP/Winserver2003
           /Vista)      2.   Create a floppy containing the patch :            - Doubleclick on the saved file (It is an executable which will
             guide you through the creation process of the patch diskette)            - Follow the instructions on the screen      3.  Shutdown the Océ Power Logic Controller
     4.  Insert the previously created patch diskette in the
          Océ Power Logic controller floppy drive.      5.  Power ON the Océ Power Logic Controller.      6. Wait until the patch is applied : a melody is played
          (you will hear 2 times a 3 tonal beeps)
                - it should take about ~3 minutes on a GX280 PC
                - before the melody is played, a PC reboot will occur
                - For Systems equipped with a monitor, an error message
                 may pop up on the controller screen : Ignore it and let the
                  process go on.      7.  Remove the patch diskette from the floppy drive Verifying if the patch was applied successfully      1. Make a « Print settings » (Refer to your Printer User manual for
        more details)
    2. Go to the last printout page in the section:
       SDS - CONTROL PARAMETERS 22-1, the last line is called:
       Patches installed = ………………………… <value>        Check that « <value> » is greater or equal to 800000000000
Troubleshooting     • 2 rapid beeps are played when Patch has already been applied
    • 2 long beeps are played when Patch file is corrupted
    • Nothing happens or 7 rapid beeps are played when Patch cannot be
       applied (Wrong Océ TDSX00/TCSX00 version)                             Patch installation instructions for systems NOT equipped with a floppy unit      1.   Download the patch file patch_shf017b.iso and save the file on
           your computer(Win98/WinMe/Win2000/WinXP/Winserver2003
           /Vista)           2.   Create a CD-ROM containing the patch from
              patch_shf017b.iso :
           Use a CD burner software (like NERO Burner or Roxio Easy
           CD Creator) to burn a CD-R from the attached ISO image
           Advices :To burn a CD-R from this ISO image file, Select an
                        action which "Burn a CD from an Image file",
                         but Do not create a CD-R with the ISO image file on it.
           For example :
                         - With NERO 5.5 Burner : use File/Burn Image
                         - With Roxio Easy CD Creator 5.1 : use File/Record CD
                            from CD Image
      3.  Insert the previously created CD-ROM in the Océ Power Logic
          controller CD drive.       4. Restart the Océ Power Logic Controller.       5. Wait until the patch is applied : a melody is played
          (you will hear 2 times a 3 tonal beeps)
                - it should take about ~3 minutes on a GX260 PC
                - before the melody is played, a PC reboot will occur
                - For Systems equipped with a monitor, an error message
                 may pop up on the controller screen Ignore it and let the
                  process go on.       6.     Remove the CD-ROM from CD drive         Verifying if the patch was applied successfully    1. Make a « Print settings » (Refer to your Printer User manual for
       more details)
   2. Go to the last printout page in the section:
       SDS - CONTROL PARAMETERS 22-1, the last line is called:
       Patches installed = ………………………… <value>       Check that « <value> » is greater or equal to 800000000000 Troubleshooting     • 2 rapid beeps are played when Patch has already been applied
    • 2 long beeps are played when Patch file is corrupted
    • Nothing happens or 7 rapid beeps or 10 long beeps are played when
       Patch cannot be applied (Wrong Océ TDSX00/TCSX00
       version)